Microaqueduct Slides (5/pk)

A 40mm diameter, 1mm thick glass circle with an ITO coating on the outer surface, having two port holes and micro aqueduct grooves in it to facilitate laminar flow perfusion in a Bioptechs FCS2 or FCS3 chamber.

$522.45

SKU 130119-5 Categories ,

As Identified in drawing below #5 the Microaqueduct slide enables the laminar flow perfusion of fluid within the FCS2 and FCS3 Chamber systems.

Exploded View of FCS2 Chamber

  1. Electrical Enclosure
    Can also be detached to sterilize the perfusion tubes
    Temperature sensor
    Heater contacts
  2. Upper Half (Top)
    Contains the perfusion tubes
  3. Perfusion Tubes (14 gauge) (CO2 Perfusion Drawing)
  4. Upper Gasket
  5. Microaqueduct Slide
    An optical surface which integrates perfusion and temperature control
    High-volume laminar flow
    Koehler Illumination
    Electronically conductive coating for temperature control
  6. Singular lower gasket
    This gasket can have any internal geometry you desire
    Standard thicknesses from .1mm to 1mm
    Allows you to define the volume and flow characteristics of the chamber
  7. 40mm coverslip
    Surface where your cells are grown
  8. Self locking base
    Designed to assure parallel uniform closure, eliminate leaks, & broken coverslips
    Temperature controlled
    Dovetail mounted to scope for stability
    No tools for assembly

Items 5,6 & 7 are the optical cavity, the gasket (#6) can be changed to any one of the gaskets below or a custom gasket can be made to make any flow geometry, or media volume you want. The coverslip comes in a standard 0.17mm, #1.5 thickness but is also available in 0.5mm, #5 coverslip.

A fluid pathway is formed by separating the Microaqueduct Slide from the coverslip containing cells with a single silicone gasket. This gasket can be any thickness from 50 micron to 1mm and any lateral geometry you choose or create. This arrangement allows the user to define the flow characteristics. Therefore, you are not limited by the geometry of the optical cavity. Instead you select or create it! Fluid access to this flow channel is made through two 14-gauge needle stock tubes protruding from the sides of the chamber top. These tubes provide fluid connection to two perfusion holes in the Microaqueduct Slide that interface two “T” shaped grooves cut into the inner surface of the Microaqueduct Slide. The “T” groove allows the media to seek the path of least resistance and become nearly laminar before flowing across the cells. This technique eliminates the need for the metal perfusion ring and additional gaskets, which are the limiting factors, required by most conventional chambers.